Water treatment of wrist watch

- Apr 11, 2018-

Water treatment of wrist watch.

Method 1.

after a watch, such as wet by water, can use a few layers of toilet paper or easy to moisture absorption of the flannelette bag tight closely, about 15 centimeters in near 40 watts of light bulbs, bake for about 30 minutes, the water vapor in the table can be moisture. Do not put the watch of the watch close to the fire to bake directly, so as to avoid heat distortion.

Method 2, 

the surface of the table in the inner and outer shell, the back wear on the wrist, two hours after the water vapor can be eliminated. If the water is serious, it is better to immediately send the watch shop to wipe the oil and remove the moisture from the core, so as to avoid the rust of the parts.

Method 3, 

use the silica gel with the granule to put into an airtight container together with the watch that has accumulated water, after several hours, take out the watch, the water will disappear completely. The simple economy of this method has no damage to the accuracy and life span of the table. The silica gel has been absorbed many times and can be dried for several hours under 120 hours. The water absorption capacity can be regenerated and can be used repeatedly.