Can the ceramic strap be polished

- Nov 01, 2017-

Ceramic strap can not be polished. Glossy, high hardness, no rust color, no pollution, chemical stability and other advantages make the ceramic material to become the new darling of the watch industry, watches and straps and so on are using high-tech ceramic composite ceramic watch, Rust and good heat resistance, with high hardness, easy to wear, never fade, without compromising the advantages of the skin.

 

High-tech ceramic, which is based on zirconia-based mineral powder (powder particles less than 1 micron in diameter) at about 1500 ° C high temperature sintering. It is the same as traditional Chinese ceramic products, has a stable physical and chemical properties, waterproof anti-fade anti-corrosion anti-corrosion, and the surface moist and flawless, able to distribute soft natural luster. Compared with the stainless steel watch, the weight of the ceramic watch is reduced by about 60%, its hardness is about 10 times that of stainless steel, and it is resistant to corrosion and heat resistance, high hardness, easy to wear and never fade. The advantages of the skin.

 

First wash the surface of the strap, and then clean the cracks in the band gap. The connection of these crevices is very close, so it is very difficult to clean the dirty things inside. Now these crevices are rolled out by the book into the cylinder, and naturally you can clean the inside of the dirt.

 

If you choose the general watch cleaning tools, the general cleaning tools, including the old toothbrush and watch special washing spirit. The general use of cleaning fluid is 120 aviation gasoline, but because the gasoline has a certain amount of impurities, so the best use of 120 gasoline with filter paper to filter, remove impurities. The cleaned parts must be dried or dried. If necessary, first brush with a brush to the dirt on the table or remove the sludge with willow sticks, and then placed in a clean gasoline cleaning.